List of My Publications

In Progress

[IP-01] “Numerical investigation of heat transfer enhancement of a circular tube using rectangular and T-shaped fin inserts in laminar flow regimes.”

Journal Papers

[JP-05] Md. Nizam Uddin, Md. Fozle Rab, A.K.M. Nazrul Islam, Eylem Asmatulu, Muhammad M. Rahman and Ramazan Asmatulu, “Nanostructured Hybrid Hydrogels for Solar-Driven Clean Water Harvesting from the Atmosphere,” Materials 2022, 15(21), 7538. [Online][DOI://].

[JP-04] Rubaya Jafrin Haque, Mohammed Shahed Hossain, and A.K.M. Nazrul Islam, “Analysis of Future Aspects of Alternative Fuel Driven Vehicles in Bangladesh,” Journal of Scientific and Engineering Research, Vol. 4, no. 11, 2017, Pages 127-134. [Online] [Full Paper].

[JP-03] A.K.M. Nazrul Islam, Farhana Alam, and Md. Ashraful Islam, “Energy and Exergy Analysis of a Coal Fired Thermal Power Plant with Varying Load Conditions,” Journal of Scientific and Engineering Research, Vol. 4, no. 7, 2017, Pages 215–229. [Online] [Full Paper].

[JP-02] A.K.M. Nazrul Islam, Md. Ashraful Islam, and Manabendra Saha, “Experimental Investigation of Transient Heat Transfer on a Solid Surface, with Fire Retardant Fabric Under Hot Air Impinging Jet, “Journal of Procedia Engineering, Vol. 105, 2015, Pages 167–175. [Online] [Full Paper] [DOI:10.1016/j.proeng.2015.05.053]

[JP-01] Mohammed Shahed Hossain, A.K.M. Nazrul Islam, Md. Aminul Islam, and Al-Basir, “Compressed natural gas (CNG): its use, prospect and future in Bangladesh, “International Journal of Energy Machinery, Vol. 4, No. 1, pp. 73−78 (2011).

International Conference Papers

[CP-10] A.K.M. Nazrul Islam, Fahim Siddique Ahmed, Masud Rana Sumon, “Root Cause Analysis of Fire Incidents in Bangladesh and A Community-based Model (CBM) to Reduce the Fire Incidents,” 6th Int. Conf. on Civil Engineering for Sustainable Development (ICCESD 2022), 10~12 February 2022, KUET, Khulna, Bangladesh. [Abstract Accepted]

[CP-09] Farzana Sultana, Sharika Marjan, Md. Shariful Islam, A.K.M. Nazrul Islam, Nur-E Alam, A.K.M. Mohiuddin, Mst. Mahmuda Khatun, “A cross-sectional study and awareness of breast self-examination of Bangladeshi women at Dhaka Medical College Hospital,” Annals of Oncology, Volume 33, Supplement 6, July 01, 2022. [Online] DOI: (IF 51.769).

[CP-08] Islam, M.S., Sultana, F., Islam, AKM N., Alam, N.E, Ullah, H., Molla, MT., Khatun, MM., Mohiuddin, AKM., “Awareness Towards Breast and Cervical Cancer Risk factors and its prevention among students and patients in Bangladesh,” Annals of Oncology, Volume 30, Issue Supplement_6, October 2019, mdz338.048. [Online] (IF 51.769).

[CP-07] Alam, NE., ……. Islam, AKM N et al., “ “Awareness about Cervical Cancer and Its Prevention among the Female Respondents of General Hospital in Bangladesh,” Annals of Oncology, Volume 30, Issue Supplement_6, October 2019, mdz338. [Online] (IF 51.769).

[CP-06] A.K.M. Nazrul Islam, Akira Murata, Katsumi Oho, Shohei Yamamoto, Kaoru Iwamoto, “Effects of Rotation Angle of Teardrop-Shaped Dimples on Heat Transfer Enhancement of Airfoil Internal Cooling Investigated by Transient Technique, “16th Int. Heat Transfer Conference (IHTC-16), August 10-15, 2018, Beijing, China, IHTC16-23228 (pp. 5537-5542). [DOI: 10.1615/IHTC16.hte.023228]

[CP-05] A.K.M. Nazrul Islam and Rubaya Jafrin Hoque, “Feasibility Study of Solar Energy in Bangladesh for Sustainable Development,” Proc. of the First Int. Conf. on Industrial and Mechanical Engineering and Operations Management (IMEOM), December 23-24, 2017, Bangladesh. [Abstract] [Full Paper].

[CP-04] Md. J. Nine, Md. A. A. Mamun, AKM Nazrul Islam, and Hyo-min Jeong, “Effects of Roughness Height in Forced Convective Heat Transfer: Macro to Micro Roughness, “Proc. of the Int. Conf. on Mechanical, Industrial and Energy Engineering, Feb 01-02, 2013, Khulna, Bangladesh. [Abstract] [Full Paper].

[CP-03] MA Islam, AA Rezwan, S Hossain and AKMN Islam, “Study of Transient Heat Transfer of A Solid with Protective Fabric under Hot Air Jet Impingement,” Proc. of the Int. Conf. on Mechanical Engineering 2011 (ICME2011), 18-20 December 2011, Dhaka-1000, Bangladesh. [Abstract] [Full Paper].

[CP-02] Mohammed Shahed Hossain, A.K.M. Nazrul Islam, Md. Aminul Islam and Md. Fuhad Hassan, “Potential analysis of Compressed Natural Gas (CNG) Vehicle and tits use in Bangladesh,” Proc. of the 2nd Int. Conf. on Environmental Aspects of Bangladesh (ICEAB 2011), in Fukuoka, Japan, September 10-11, 2011 [Abstract] [Full Paper].

[CP-01] C.M. Feroz, Manabendra Saha, A.I. Uddin, and A.K.M. Nazrul Islam, “Experimental investigation and thermal performance of looped parallel micro heat pipe (LMPHP) by using different fluids,” Proc. of the Int. Conf. on Mechanical, Industrial and Energy Engineering (ICMIEE 2010), Khulna, Bangladesh. Dec 23-24, 2010 [Abstract] [Full Paper].

National Conference Papers

[NP-02] Mohammed Shahed Hossain, AKM Zakir Ullah, AKM Nazrul Islam, and Amirul Hossen Rupok, “Strategy of Wind Energy Workforce Development: Implementation & Compare with Current Wind Scenario of Bangladesh”, Proc. of the 15th Annual Paper Meet, Mechanical Engineering Division,The Institution of Engineers, Bangladesh (IEB), Dhaka, Bangladesh. February 7-8, 2014 [Abstract] [Full Paper].

[NP-01] Mohammed Shahed Hossain, Minhaz Rahman, A.K.M. Nazrul Islam, and Md. Fuhad Hassan, “Strategy for Promotions and Development of Wind Energy in Bangladesh”, Proc. of the National Seminar on Renewable Energy-2011, Dhaka, Bangladesh. April 6-8, 2011 [Abstract] [Full Paper].

Poster Papers

[PP-02] A.K.M. Nazrul Islam, “Energy Efficient Gas Turbine Blade Design”, Poster presented in Introduction to Global Science, Tokyo University of Agriculture and Technology, Tokyo, Japan, March 28, 2018.

[PP-01] A.K.M. Nazrul Islam, Farhana Alam, and Md. Ashraful Islam, “Energy and exergy analysis of a coal based thermal power plant”, Proc. of the 6th BSME Int. Conf. on Thermal Engineering (ICTE 2014), Dec 19-21 2014, Dhaka, Bangladesh. [Abstract] [Full Paper].

Lecture/ Invited Talk

[Talk-01] A.K.M. Nazrul Islam, “Experimental Investigation of Gas Turbine Airfoil Internal Cooling by Teardrop Shaped Dimples and Effects of Rotation Angle of Dimpled Surface”, Invited talk at Young Researchers Meeting (YRM) of 16th International Heat Transfer Conference (IHTC16) at Tsinghua University, China, August 14, 2018.